RUSTTY ON THE FACTS MD-DUCC 1
Decimator MD-DUCC (pronounced DUCK!)
Multi-Definition Down Up Cross Converter
DUCC1. Three Products In One
1.1 The Legacy Products 3G2SD and 3G2SD-M and 3G12DAC, in one sweeping move, have been replaced with the MD-DUCC. This new unit is based on the same technology used in the popular DecimatorV2 and MD-Quad.
1.2 In the area of SDI Conversion, the MD_DUCC will allow for any HD format in to be converted to any HD format out, from SD to 3G rates.
DUCC2. Future Proof Features!
2.1 Digital Video (SDI) outputs, HDMI and Analog Composite and Component.
2.2 Analog Audio Pairs or AES pair 2.3 Safe Area, Safe Title, Center Cross
2.4 16 Channels of Audio Metering
2.5 FW updates, downloadable, a quick 2 minutes and you have new features.
DUCC3. Got a DUCC? Need to know a few quick Operational facts.
3.1 The MD-DUCCs SDI and HMDI outputs are by default set to pass through mode.
3. 2 In order to do conversions on the MD-DUCC the units scaling feature must be
turned on this can be done manually by going to menu 5 and setting LED 1 to
green or via USB control panel under the scaling tab. Once scaling is
enabled using the output format drop down box you can set the format you desire.
3.3 The audio meters, graticules and on screen displays are outputted on the
HDMI, (SD/HD/3G)-SDI and Analogue outputs. The Analogue output of the
MD-DUCC is by default set to 3x CVBS (Composite) by going to the control tab
of the Control panel you can select 3x CVBS, component or RGB via the
analogue output.
3.4 In order to use the 3xCVBS output the scaling format must be set to
SD720x487i59.97, SD720x576i50
(or SD-SDI input of same formats with unit in pass through mode, scaling off)
3.5 3G formats cannot be displayed on the Analogue output.
DUCC4. Need the Specs / Ops manual
4.1 The manual operating spec sheet on our site
DUCC5. UCP Panel
4.1 Watch a video of the UCP panel and DUCC features. (starts a little slow)